GAS LAWS

Boyle's Law - Introduction and Experimental Investigation

By the end of the lesson, the learner should be able to:
State Boyle's law
Explain Boyle's law using kinetic theory of matter
Investigate the relationship between pressure and volume of a fixed mass of gas
Plot graphs to illustrate Boyle's law

In groups, learners are guided to:
Teacher demonstration: Use bicycle pump to show volume-pressure relationship. Students observe force needed to compress gas. Q/A: Review kinetic theory. Class experiment: Investigate pressure-volume relationship using syringes. Record observations in table format. Discuss observations using kinetic theory.

Bicycle pump, Syringes, Gas jars, Chart showing volume-pressure relationship

KLB Secondary Chemistry Form 3, Pages 1-3

GAS LAWS

Boyle's Law - Mathematical Expression and Graphical Representation
Boyle's Law - Numerical Problems and Applications
Charles's Law - Introduction and Temperature Scales
Charles's Law - Experimental Investigation and Mathematical Expression

By the end of the lesson, the learner should be able to:
Express Boyle's law mathematically
Apply the equation PV = constant
Plot and interpret pressure vs volume graphs
Plot pressure vs 1/volume graphs

In groups, learners are guided to:
Q/A: Recall previous lesson observations. Teacher exposition: Derive P₁V₁ = P₂V₂ equation from experimental data. Students plot graphs of pressure vs volume and pressure vs 1/volume. Analyze graph shapes and interpret mathematical relationship.

Graph papers, Scientific calculators, Chart showing mathematical expressions
Scientific calculators, Worked example charts, Unit conversion tables
Round-bottomed flask, Narrow glass tube, Colored water, Rubber bung, Hot and cold water baths
Glass apparatus, Thermometers, Graph papers, Water baths at different temperatures

KLB Secondary Chemistry Form 3, Pages 3-4

GAS LAWS

Charles's Law - Numerical Problems and Applications
Combined Gas Law and Standard Conditions
Introduction to Diffusion - Experimental Investigation
Rates of Diffusion - Comparative Study
Graham's Law of Diffusion - Theory and Mathematical Expression

By the end of the lesson, the learner should be able to:
Solve numerical problems using Charles's law
Apply V₁/T₁ = V₂/T₂ in calculations
Predict gas behavior with temperature changes
Relate Charles's law to everyday phenomena
Compare diffusion rates of different gases
Investigate factors affecting diffusion rates
Measure relative distances covered by diffusing gases
Calculate rates of diffusion using distance and time data

In groups, learners are guided to:
Worked examples: Step-by-step problem solving with temperature conversions. Supervised practice: Calculate volumes at different temperatures. Discuss applications: hot air balloons, tire pressure changes, weather balloons. Assignment: Practice problems with real-life contexts.
Class experiment: Ammonia and HCl diffusion in glass tube. Insert cotton wool soaked in concentrated NH₃ and HCl at opposite ends. Time the formation of white NH₄Cl ring. Measure distances covered by each gas. Calculate rates: distance/time. Compare molecular masses of NH₃ and HCl.

Scientific calculators, Temperature conversion charts, Application examples
Scientific calculators, Combined law derivation charts, Standard conditions reference table
KMnO₄ crystals, Bromine liquid, Gas jars, Combustion tube, Litmus papers, Stopwatch
Glass tube (25cm), Cotton wool, Concentrated NH₃ and HCl, Stopwatch, Ruler, Safety equipment
Graham's law charts, Molecular mass tables, Mathematical derivation displays

KLB Secondary Chemistry Form 3, Pages 10-12
KLB Secondary Chemistry Form 3, Pages 16-18

GAS LAWS
THE MOLE

Graham's Law - Numerical Applications and Problem Solving
Relative Mass - Introduction and Experimental Investigation

By the end of the lesson, the learner should be able to:
Solve numerical problems using Graham's law
Calculate relative rates of diffusion
Determine molecular masses from diffusion data
Compare diffusion times for equal volumes of gases

In groups, learners are guided to:
Worked examples: Calculate relative diffusion rates using √(M₂/M₁). Problems involving time comparisons for equal volumes. Calculate unknown molecular masses from rate data. Supervised practice: Various Graham's law calculations. Real-life applications: gas separation, gas masks.

Scientific calculators, Worked example charts, Molecular mass reference tables
Different sized nails ( 5-15cm), Beam balance, Fruits of different masses, Reference charts

KLB Secondary Chemistry Form 3, Pages 20-22

THE MOLE

Avogadro's Constant and the Mole Concept

By the end of the lesson, the learner should be able to:
Define Avogadro's constant and its value
Explain the concept of a mole as a counting unit
Relate molar mass to relative atomic mass
Calculate number of atoms in given masses of elements

In groups, learners are guided to:
Experiment: Determine number of nails with mass equal to relative mass in grams. Teacher exposition: Introduce Avogadro's constant (6.023 × 10²³). Discussion: Mole as counting unit like dozen. Worked examples: Calculate moles from mass and vice versa.

Beam balance, Various sized nails, Scientific calculators, Avogadro's constant charts

KLB Secondary Chemistry Form 3, Pages 27-30

THE MOLE

Interconversion of Mass and Moles for Elements
Molecules and Moles - Diatomic Elements

By the end of the lesson, the learner should be able to:
Apply the formula: moles = mass/molar mass
Calculate mass from given moles of elements
Convert between moles and number of atoms
Solve numerical problems involving moles and mass

In groups, learners are guided to:
Worked examples: Mass-mole conversions using triangle method. Supervised practice: Calculate moles in given masses of common elements. Problem solving: Convert moles to atoms using Avogadro's number. Assignment: Practice problems on interconversion.

Scientific calculators, Periodic table, Worked example charts, Formula triangles
Molecular models, Charts showing diatomic elements, Scientific calculators

KLB Secondary Chemistry Form 3, Pages 30-32

THE MOLE

Empirical Formula - Experimental Determination
Empirical Formula - Reduction Method
Empirical Formula - Percentage Composition Method
Molecular Formula - Determination from Empirical Formula

By the end of the lesson, the learner should be able to:
Define empirical formula
Determine empirical formula from experimental data
Calculate mole ratios from mass data
Express results as simplest whole number ratios
Calculate empirical formula from percentage composition
Convert percentages to moles
Determine simplest whole number ratios
Apply method to various compounds

In groups, learners are guided to:
Experiment: Burning magnesium in air to form magnesium oxide. Measure masses before and after reaction. Calculate moles of Mg and O from mass data. Determine mole ratio and empirical formula. Safety precautions during heating.
Worked examples: Calculate empirical formula from percentage data. Method: percentage → mass → moles → ratio. Practice problems: Various compounds with different compositions. Discussion: When to multiply ratios to get whole numbers.

Crucible and lid, Magnesium ribbon, Bunsen burner, Beam balance, Tongs, Safety equipment
Combustion tube, Porcelain boat, Copper(II) oxide, Laboratory gas, Beam balance, Bunsen burner
Scientific calculators, Percentage composition charts, Worked example displays
Scientific calculators, Molecular mass charts, Worked example displays

KLB Secondary Chemistry Form 3, Pages 32-35
KLB Secondary Chemistry Form 3, Pages 37-38

THE MOLE

Molecular Formula - Combustion Analysis

By the end of the lesson, the learner should be able to:
Determine molecular formula from combustion data
Calculate moles of products in combustion
Relate product moles to reactant composition
Apply combustion analysis to hydrocarbons

In groups, learners are guided to:
Worked examples: Hydrocarbon combustion producing CO₂ and H₂O. Calculate moles of C and H from product masses. Determine empirical formula, then molecular formula. Practice: Various combustion analysis problems.

Scientific calculators, Combustion analysis charts, Molecular models of hydrocarbons

KLB Secondary Chemistry Form 3, Pages 40-41

THE MOLE

Concentration and Molarity of Solutions
Preparation of Molar Solutions

By the end of the lesson, the learner should be able to:
Define concentration and molarity of solutions
Calculate molarity from mass and volume data
Convert between different concentration units
Apply molarity calculations to various solutions

In groups, learners are guided to:
Teacher exposition: Definition of molarity (moles/dm³). Worked examples: Calculate molarity from mass of solute and volume. Convert between g/dm³ and mol/dm³. Practice problems: Various salt solutions and their molarities.

Scientific calculators, Molarity charts, Various salt samples for demonstration
Volumetric flasks (250, 500, 1000cm³), Sodium hydroxide pellets, Beam balance, Wash bottles, Beakers

KLB Secondary Chemistry Form 3, Pages 41-43

THE MOLE

Dilution of Solutions
Stoichiometry - Experimental Determination of Equations

By the end of the lesson, the learner should be able to:
Define dilution process
Apply dilution formula M₁V₁ = M₂V₂
Calculate concentrations after dilution
Prepare dilute solutions from concentrated ones

In groups, learners are guided to:
Experiment: Dilute 25cm³ of 2M HCl to different final volumes (250cm³ and 500cm³). Calculate resulting concentrations. Worked examples using dilution formula. Safety precautions when diluting acids.

Volumetric flasks, Hydrochloric acid (2M), Measuring cylinders, Pipettes, Safety equipment
Iron filings, Copper(II) sulphate solution, Beam balance, Beakers, Filter equipment

KLB Secondary Chemistry Form 3, Pages 46-50

THE MOLE

Stoichiometry - Precipitation Reactions
Stoichiometry - Gas Evolution Reactions
Volumetric Analysis - Introduction and Apparatus

By the end of the lesson, the learner should be able to:
Investigate stoichiometry of precipitation reactions
Determine mole ratios from volume measurements
Write ionic equations for precipitation
Analyze limiting and excess reagents
Determine stoichiometry of gas-producing reactions
Collect and measure gas volumes
Calculate mole ratios involving gases
Write equations for acid-carbonate reactions

In groups, learners are guided to:
Experiment: Pb(NO₃)₂ + KI precipitation reaction. Use different volumes to determine stoichiometry. Measure precipitate heights. Plot graphs to find reaction ratios. Identify limiting reagents.
Experiment: HCl + Na₂CO₃ reaction. Collect CO₂ gas in plastic bag. Measure gas mass and calculate moles. Determine mole ratios of reactants and products. Write balanced equation.

Test tubes, Lead(II) nitrate solution, Potassium iodide solution, Burettes, Ethanol, Rulers
Conical flask, Thistle funnel, Plastic bags, Rubber bands, Sodium carbonate, HCl solution
Pipettes (10, 20, 25cm³), Burettes (50cm³), Pipette fillers, Conical flasks, Various solutions

KLB Secondary Chemistry Form 3, Pages 53-56
KLB Secondary Chemistry Form 3, Pages 56-58

THE MOLE

Titration - Acid-Base Neutralization
Titration - Diprotic Acids

By the end of the lesson, the learner should be able to:
Perform acid-base titrations accurately
Use indicators to determine end points
Record titration data properly
Calculate average titres from multiple readings

In groups, learners are guided to:
Experiment: Titrate 25cm³ of 0.1M NaOH with 0.1M HCl using phenolphthalein. Repeat three times for consistency. Record data in tabular form. Calculate average titre. Discuss accuracy and precision.

Burettes, Pipettes, 0.1M NaOH, 0.1M HCl, Phenolphthalein indicator, Conical flasks
Burettes, Pipettes, 0.1M H₂SO₄, 0.1M NaOH, Phenolphthalein, Basicity reference chart

KLB Secondary Chemistry Form 3, Pages 59-62

THE MOLE

Standardization of Solutions

By the end of the lesson, the learner should be able to:
Define standardization process
Standardize HCl using Na₂CO₃ as primary standard
Calculate accurate concentrations from titration data
Understand importance of primary standards

In groups, learners are guided to:
Experiment: Prepare approximately 0.1M HCl and standardize using accurately weighed Na₂CO₃. Use methyl orange indicator. Calculate exact molarity from titration results. Discuss primary standard requirements.

Anhydrous Na₂CO₃, Approximately 0.1M HCl, Methyl orange, Volumetric flasks, Analytical balance

KLB Secondary Chemistry Form 3, Pages 65-67

THE MOLE

Back Titration Method
Redox Titrations - Principles

By the end of the lesson, the learner should be able to:
Understand principle of back titration
Apply back titration to determine composition
Calculate concentrations using back titration data
Determine atomic masses from back titration

In groups, learners are guided to:
Experiment: Determine atomic mass of divalent metal in MCO₃. Add excess HCl to carbonate, then titrate excess with NaOH. Calculate moles of acid that reacted with carbonate. Determine metal's atomic mass.

Metal carbonate sample, 0.5M HCl, 0M NaOH, Phenolphthalein, Conical flasks
Potassium manganate(VII), Potassium dichromate(VI), Iron(II) solutions, Color change charts

KLB Secondary Chemistry Form 3, Pages 67-70

THE MOLE

Redox Titrations - KMnO₄ Standardization
Water of Crystallization Determination
Atomicity and Molar Gas Volume
Combining Volumes of Gases - Experimental Investigation

By the end of the lesson, the learner should be able to:
Standardize KMnO₄ solution using iron(II) salt
Calculate molarity from redox titration data
Apply 1:5 mole ratio in calculations
Prepare solutions for redox titrations
Define atomicity of gaseous elements
Classify gases as monoatomic, diatomic, or triatomic
Determine molar gas volume experimentally
Calculate gas densities and molar masses

In groups, learners are guided to:
Experiment: Standardize KMnO₄ using FeSO₄(NH₄)₂SO₄·6H₂O. Dissolve iron salt in boiled, cooled water. Titrate with KMnO₄ until persistent pink color. Calculate molarity using 5:1 mole ratio.
Experiment: Measure volumes and masses of different gases (O₂, CO₂, Cl₂). Calculate densities and molar masses. Determine volume occupied by one mole. Compare values at different conditions.

Iron(II) ammonium sulfate, KMnO₄ solution, Dilute H₂SO₄, Pipettes, Burettes
Hydrated iron(II) salt, Standardized KMnO₄, Dilute H₂SO₄, Analytical balance
Gas syringes (50cm³), Various gases, Analytical balance, Gas supply apparatus
Gas syringes, Dry NH₃ generator, Dry HCl generator, Glass connecting tubes, Clips

KLB Secondary Chemistry Form 3, Pages 70-72
KLB Secondary Chemistry Form 3, Pages 73-75

THE MOLE

Gas Laws and Chemical Equations

By the end of the lesson, the learner should be able to:
Apply Avogadro's law to chemical reactions
Use volume ratios to determine chemical equations
Calculate product volumes from reactant volumes
Solve problems involving gas stoichiometry

In groups, learners are guided to:
Worked examples: Use Gay-Lussac's law to determine equations. Calculate volumes of products from given reactant volumes. Apply Avogadro's law to find number of molecules. Practice: Complex gas stoichiometry problems.

Scientific calculators, Gas law charts, Volume ratio examples

KLB Secondary Chemistry Form 3, Pages 77-79

ORGANIC CHEMISTRY I

Introduction to Organic Chemistry and Hydrocarbons
Sources of Alkanes - Natural Gas, Biogas, and Crude Oil

By the end of the lesson, the learner should be able to:
Define organic chemistry and hydrocarbons
Explain why carbon forms many compounds
Classify hydrocarbons into alkanes, alkenes, and alkynes
Identify the bonding in carbon compounds

In groups, learners are guided to:
Teacher exposition: Definition of organic chemistry. Discussion: Unique properties of carbon - tetravalency, catenation, multiple bonding. Q/A: Examples of hydrocarbons in daily life. Introduction to three main groups of hydrocarbons.

Carbon models, Hydrocarbon structure charts, Molecular model kits
Biogas digester model/diagram, Natural gas composition charts, Organic waste samples

KLB Secondary Chemistry Form 3, Pages 86-87

ORGANIC CHEMISTRY I

Fractional Distillation of Crude Oil
Cracking of Alkanes - Thermal and Catalytic Methods

By the end of the lesson, the learner should be able to:
Explain fractional distillation process
Perform fractional distillation of crude oil
Identify different fractions and their uses
Relate boiling points to molecular size

In groups, learners are guided to:
Experiment: Fractional distillation of crude oil using improvised column. Collect fractions at different temperatures (120°C intervals up to 350°C). Test fractions for appearance, flammability, and viscosity. Record observations and relate to molecular size.

Crude oil sample, Boiling tubes, High-temperature thermometer, Sand/porcelain chips, Bunsen burner, Test tubes
Cracking process diagrams, Chemical equation charts, Catalyst samples for demonstration

KLB Secondary Chemistry Form 3, Pages 87-89

ORGANIC CHEMISTRY I

Alkane Series and Homologous Series Concept
Nomenclature of Alkanes - Straight Chain and Branched
Isomerism in Alkanes - Structural Isomers

By the end of the lesson, the learner should be able to:
Define homologous series using alkanes
Write molecular formulas for first 10 alkanes
Identify characteristics of homologous series
Apply general formula CₙH₂ₙ₊₂ for alkanes
Name straight-chain alkanes using IUPAC rules
Identify parent chains in branched alkanes
Name branched alkanes with substituent groups
Apply systematic naming rules correctly

In groups, learners are guided to:
Teacher exposition: Homologous series definition and characteristics. Table completion: Names, molecular formulas, and structures of first 10 alkanes. Discussion: General formula application. Pattern recognition: Gradual change in physical properties.
Teacher demonstration: Step-by-step naming of branched alkanes. Rules application: Longest chain identification, numbering from nearest branch, substituent naming. Practice exercises: Various branched alkane structures. Group work: Name complex branched alkanes.

Alkane series chart, Molecular formula worksheets, Periodic table
Structural formula charts, IUPAC naming rules poster, Molecular model kits
Molecular model kits, Isomerism charts, Structural formula worksheets

KLB Secondary Chemistry Form 3, Pages 90-92

ORGANIC CHEMISTRY I

Laboratory Preparation of Methane
Laboratory Preparation of Ethane

By the end of the lesson, the learner should be able to:
Describe laboratory preparation of methane
Perform methane preparation experiment safely
Test physical and chemical properties of methane
Write equation for methane preparation

In groups, learners are guided to:
Experiment: Heat mixture of sodium ethanoate and soda lime. Collect methane gas over water. Tests: Color, smell, combustion, reaction with bromine in dark. Record observations in table format. Safety precautions during gas collection.

Sodium ethanoate, Soda lime, Round-bottomed flask, Gas collection apparatus, Bromine water, Wooden splints
Sodium propanoate, Soda lime, Gas collection apparatus, Testing materials

KLB Secondary Chemistry Form 3, Pages 94-96

ORGANIC CHEMISTRY I

Physical Properties of Alkanes
Chemical Properties of Alkanes - Combustion and Substitution

By the end of the lesson, the learner should be able to:
Describe physical properties of alkanes
Explain trends in melting and boiling points
Relate molecular size to physical properties
Compare solubility in different solvents

In groups, learners are guided to:
Data analysis: Study table of physical properties of first 10 alkanes. Graph plotting: Boiling points vs number of carbon atoms. Discussion: Intermolecular forces and property trends. Q/A: Solubility patterns in polar and non-polar solvents.

Physical properties data tables, Graph paper, Calculators, Solubility demonstration materials
Molecular models, Halogenation reaction charts, Chemical equation worksheets

KLB Secondary Chemistry Form 3, Pages 96-97

ORGANIC CHEMISTRY I

Uses of Alkanes in Industry and Daily Life

By the end of the lesson, the learner should be able to:
List major uses of different alkanes
Explain industrial applications of alkanes
Describe environmental considerations
Evaluate economic importance of alkanes

In groups, learners are guided to:
Discussion: Uses of gaseous alkanes as fuels. Teacher exposition: Industrial applications - carbon black, methanol production, hydrogen source. Q/A: Environmental impact and cleaner fuel initiatives. Assignment: Research local uses of alkane products.

Industrial application charts, Product samples, Environmental impact materials

KLB Secondary Chemistry Form 3, Pages 98-100

ORGANIC CHEMISTRY I

Introduction to Alkenes and Functional Groups
Nomenclature of Alkenes
Isomerism in Alkenes - Branching and Positional
Laboratory Preparation of Ethene

By the end of the lesson, the learner should be able to:
Define alkenes and unsaturation
Identify the C=C functional group
Write general formula for alkenes (CₙH₂ₙ)
Compare alkenes with alkanes
Draw structural isomers of alkenes
Distinguish between branching and positional isomerism
Identify geometric isomers in alkenes
Predict isomer numbers for given molecular formulas

In groups, learners are guided to:
Teacher exposition: Alkenes definition and unsaturation concept. Introduction: C=C double bond as functional group. Table study: First 6 members of alkene series. Comparison: Alkenes vs alkanes - formulas and structures.
Practical exercise: Draw all isomers of butene and pentene. Teacher exposition: Branching vs positional isomerism in alkenes. Model building: Use molecular models for isomer visualization. Discussion: Geometric isomerism introduction (basic level).

Alkene series charts, Molecular models showing double bonds, Functional group posters
IUPAC naming charts for alkenes, Structural formula worksheets, Molecular model kits
Molecular model kits, Isomerism worksheets, Geometric isomer models
Ethanol, Concentrated H₂SO₄, Round-bottomed flask, Sand bath, Gas collection apparatus, Testing solutions

KLB Secondary Chemistry Form 3, Pages 100-101
KLB Secondary Chemistry Form 3, Pages 102

ORGANIC CHEMISTRY I

Alternative Preparation of Ethene and Physical Properties

By the end of the lesson, the learner should be able to:
Describe catalytic dehydration using aluminum oxide
Compare different preparation methods
List physical properties of ethene
Explain trends in alkene physical properties

In groups, learners are guided to:
Demonstration: Alternative method using Al₂O₃ catalyst. Comparison: Acid vs catalytic dehydration methods. Data analysis: Physical properties of alkenes table. Discussion: Property trends with increasing molecular size.

Aluminum oxide catalyst, Glass wool, Alternative apparatus setup, Physical properties charts

KLB Secondary Chemistry Form 3, Pages 102-104

ORGANIC CHEMISTRY I

Chemical Properties of Alkenes - Addition Reactions
Oxidation Reactions of Alkenes and Polymerization

By the end of the lesson, the learner should be able to:
Explain addition reactions due to C=C double bond
Write equations for halogenation of alkenes
Describe hydrogenation and hydrohalogenation
Explain addition mechanism

In groups, learners are guided to:
Teacher exposition: Addition reactions definition and mechanism. Worked examples: Ethene + Cl₂, Br₂, HBr, H₂. Discussion: Markovnikov's rule for unsymmetrical addition. Practice: Various addition reaction equations.

Addition reaction charts, Mechanism diagrams, Chemical equation worksheets
Oxidizing agents for demonstration, Polymer samples, Polymerization charts, Monomer-polymer models

KLB Secondary Chemistry Form 3, Pages 105-107

ORGANIC CHEMISTRY I

Tests for Alkenes and Uses
Introduction to Alkynes and Triple Bond

By the end of the lesson, the learner should be able to:
Perform chemical tests to identify alkenes
Use bromine water and KMnO₄ as test reagents
List industrial and domestic uses of alkenes
Explain importance in plastic manufacture

In groups, learners are guided to:
Practical session: Test known alkenes with bromine water and acidified KMnO₄. Observe rapid decolorization compared to alkanes. Discussion: Uses in plastics, ethanol production, fruit ripening, detergents. Assignment: Research alkene applications.

Test alkenes, Bromine water, Acidified KMnO₄, Plastic samples, Uses reference charts
Alkyne series charts, Triple bond molecular models, Unsaturation comparison charts

KLB Secondary Chemistry Form 3, Pages 108-109

ORGANIC CHEMISTRY I

Nomenclature and Isomerism in Alkynes

By the end of the lesson, the learner should be able to:
Apply IUPAC naming rules for alkynes
Name branched alkynes with substituents
Draw structural isomers of alkynes
Identify branching and positional isomerism

In groups, learners are guided to:
Teacher demonstration: Systematic naming of alkynes using -yne suffix. Practice exercises: Name various alkyne structures. Drawing exercise: Isomers of pentyne and hexyne. Group work: Complex branched alkynes with multiple substituents.

IUPAC naming rules for alkynes, Structural formula worksheets, Molecular model kits

KLB Secondary Chemistry Form 3, Pages 110-111

ORGANIC CHEMISTRY I

Laboratory Preparation of Ethyne
Physical and Chemical Properties of Alkynes
Addition Reactions of Alkynes and Chemical Tests
Uses of Alkynes and Industrial Applications

By the end of the lesson, the learner should be able to:
Prepare ethyne from calcium carbide and water
Set up gas collection apparatus safely
Test physical and chemical properties of ethyne
Write equation for ethyne preparation
Write equations for halogenation of alkynes
Describe hydrogenation and hydrohalogenation
Compare reaction rates: alkynes vs alkenes
Perform chemical tests for alkynes

In groups, learners are guided to:
Experiment: Calcium carbide + water reaction. Use sand layer for heat absorption. Collect ethyne over water. Tests: Color, smell, combustion, bromine water, acidified KMnO₄. Safety: Dry apparatus, controlled water addition.
Worked examples: Two-step addition reactions of ethyne with Br₂, Cl₂, H₂. Discussion: Faster reaction rates in alkynes compared to alkenes. Practical session: Test alkynes with oxidizing agents. Comparison: Rate of decolorization vs alkenes.

Calcium carbide, Sand, Flat-bottomed flask, Dropping funnel, Gas collection apparatus, Testing solutions
Physical properties charts, Comparison tables, Combustion equation examples
Addition reaction charts, Chemical equation worksheets, Test solutions, Stopwatch for rate comparison
Industrial application charts, Welding equipment demonstration/video, Synthetic fiber samples

KLB Secondary Chemistry Form 3, Pages 111-112
KLB Secondary Chemistry Form 3, Pages 113-115

NITROGEN AND ITS COMPOUNDS

Introduction to Nitrogen - Properties and Occurrence
Isolation of Nitrogen from Air - Industrial and Laboratory Methods

By the end of the lesson, the learner should be able to:
Describe position of nitrogen in the periodic table
State electron configuration of nitrogen
Identify natural occurrence of nitrogen
Explain why nitrogen exists as diatomic molecules

In groups, learners are guided to:
Teacher exposition: Nitrogen as Group V element, atomic number 7, electron arrangement Discussion: 78% of atmosphere is nitrogen. Q/A: Combined nitrogen in compounds - nitrates, proteins. Explanation: N≡N triple bond strength.

Periodic table charts, Atmospheric composition diagrams, Molecular models showing N≡N triple bond
Aspirator, KOH solution, Copper turnings, Heating apparatus, Fractional distillation flow chart

KLB Secondary Chemistry Form 3, Pages 119

NITROGEN AND ITS COMPOUNDS

Laboratory Preparation of Nitrogen Gas

By the end of the lesson, the learner should be able to:
Prepare nitrogen gas from ammonium compounds
Use sodium nitrite and ammonium chloride method
Test physical and chemical properties of nitrogen
Write equations for nitrogen preparation

In groups, learners are guided to:
Experiment: Mix sodium nitrite (7g) and ammonium chloride ( 5g) with water. Heat gently and collect gas over water. Tests: Color, smell, burning splint, litmus paper, lime water, burning Mg and S. Safety precautions during heating.

Sodium nitrite, Ammonium chloride, Round-bottomed flask, Gas collection apparatus, Test reagents, Deflagrating spoon

KLB Secondary Chemistry Form 3, Pages 121-123

NITROGEN AND ITS COMPOUNDS

Properties and Uses of Nitrogen Gas
Nitrogen(I) Oxide - Preparation and Properties

By the end of the lesson, the learner should be able to:
Describe physical properties of nitrogen
Explain chemical inertness of nitrogen
Describe reactions at high temperatures
List industrial uses of nitrogen

In groups, learners are guided to:
Analysis of test results: Colorless, odorless, does not burn or support combustion. Discussion: Triple bond strength and chemical inertness. High temperature reactions with metals forming nitrides. Uses: Haber process, light bulbs, refrigerant, inert atmosphere.

Property summary charts, Uses of nitrogen displays, Industrial application diagrams
Ammonium nitrate, Test tubes, Gas collection apparatus, Copper turnings, Sulfur, Glowing splints

KLB Secondary Chemistry Form 3, Pages 121-123

NITROGEN AND ITS COMPOUNDS

Nitrogen(II) Oxide - Preparation and Properties
Nitrogen(IV) Oxide - Preparation and Properties
Comparison of Nitrogen Oxides and Environmental Effects

By the end of the lesson, the learner should be able to:
Prepare nitrogen(II) oxide from copper and dilute nitric acid
Observe colorless gas and brown fumes formation
Test reactions with air and iron(II) sulfate
Explain oxidation in air to NO₂
Compare preparation methods of nitrogen oxides
Distinguish between different nitrogen oxides
Explain formation in vehicle engines
Describe environmental pollution effects

In groups, learners are guided to:
Experiment: Add dilute HNO₃ to copper turnings. Observe brown fumes formation then disappearance. Tests: Effect on litmus, burning splint, FeSO₄ complex formation. Discussion: NO oxidation to NO₂ in air.
Comparative study: Properties table of N₂O, NO, NO₂. Discussion: Formation in internal combustion engines. Environmental effects: Acid rain formation, smog, health problems. Worked examples: Distinguishing tests for each oxide.

Copper turnings, Dilute nitric acid, Gas collection apparatus, Iron(II) sulfate solution, Test reagents
Copper turnings, Concentrated nitric acid, Lead(II) nitrate, Gas collection apparatus, U-tube with ice, Testing materials
Comparison charts, Environmental impact diagrams, Vehicle emission illustrations

KLB Secondary Chemistry Form 3, Pages 125-127
KLB Secondary Chemistry Form 3, Pages 123-131

NITROGEN AND ITS COMPOUNDS

Laboratory Preparation of Ammonia
Preparation of Aqueous Ammonia and Solubility

By the end of the lesson, the learner should be able to:
Prepare ammonia from ammonium salts and alkalis
Set up apparatus with proper gas collection
Test characteristic properties of ammonia
Explain displacement reaction principle

In groups, learners are guided to:
Experiment: Heat mixture of calcium hydroxide and ammonium chloride. Collect gas by upward delivery using calcium oxide as drying agent. Tests: Color, smell, combustion, HCl fumes test, litmus paper. Safety: Slanted flask position.

Calcium hydroxide, Ammonium chloride, Round-bottomed flask, Calcium oxide, HCl solution, Glass rod, Litmus paper
Ammonia generation apparatus, Funnel, Universal indicator, Fountain apparatus, pH meter/paper

KLB Secondary Chemistry Form 3, Pages 131-134

NITROGEN AND ITS COMPOUNDS

Reactions of Aqueous Ammonia with Metal Ions
Chemical Properties of Ammonia - Reactions with Acids and Combustion

By the end of the lesson, the learner should be able to:
Test reactions of aqueous ammonia with various metal ions
Observe precipitate formation and dissolution
Explain complex ion formation
Use reactions for metal ion identification

In groups, learners are guided to:
Experiment: Add aqueous ammonia dropwise to solutions of Ca²⁺, Mg²⁺, Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Cu²⁺. Record observations with few drops vs excess ammonia. Identify complex ion formation with Zn²⁺ and Cu²⁺.

Various metal salt solutions, Aqueous ammonia, Test tubes, Droppers, Observation recording tables
Various dilute acids, Methyl orange, Oxygen supply, Platinum wire, Copper(II) oxide, Combustion apparatus, U-tube for collection

KLB Secondary Chemistry Form 3, Pages 136-138

NITROGEN AND ITS COMPOUNDS

Industrial Manufacture of Ammonia - The Haber Process
Uses of Ammonia and Introduction to Nitrogenous Fertilizers

By the end of the lesson, the learner should be able to:
Describe raw materials and their sources
Explain optimum conditions for ammonia synthesis
Draw flow diagram of Haber process
Explain economic considerations and catalyst use

In groups, learners are guided to:
Teacher exposition: N₂ from air, H₂ from natural gas/cracking. Process conditions: 500°C, 200 atm, iron catalyst. Flow diagram study: Purification, compression, catalytic chamber, separation, recycling. Economic factors: Compromise between yield and rate.

Haber process flow charts, Industrial diagrams, Catalyst samples, Economic analysis sheets
Fertilizer samples, Percentage calculation worksheets, Use application charts, Calculator

KLB Secondary Chemistry Form 3, Pages 140-141

NITROGEN AND ITS COMPOUNDS

Nitrogenous Fertilizers - Types and Calculations
Laboratory Preparation of Nitric(V) Acid
Industrial Manufacture of Nitric(V) Acid

By the end of the lesson, the learner should be able to:
Calculate percentage nitrogen in various fertilizers
Compare fertilizer effectiveness
Prepare simple nitrogenous fertilizers
Discuss environmental considerations
Prepare nitric acid from nitrate and concentrated sulfuric acid
Set up all-glass apparatus safely
Explain brown fumes and yellow color
Purify nitric acid by air bubbling

In groups, learners are guided to:
Worked examples: Calculate % N in (NH₄)₂SO₄, NH₄NO₃, (NH₄)₃PO₄, CO(NH₂)₂, CAN. Comparison: Urea has highest nitrogen content. Practical: Prepare ammonium sulfate from ammonia and sulfuric acid. Environmental impact discussion.
Experiment: Heat mixture of KNO₃ and concentrated H₂SO₄ in all-glass apparatus. Collect yellow nitric acid. Explain brown fumes (NO₂) and yellow color. Bubble air through to remove dissolved NO₂. Safety: Gentle heating, fume cupboard.

Various fertilizer formulas, Scientific calculators, Laboratory preparation materials, Environmental impact data
Potassium nitrate, Concentrated sulfuric acid, All-glass apparatus, Condenser, Retort stand, Safety equipment
Industrial process flow charts, Catalyst samples, Process condition charts, Efficiency calculation sheets

KLB Secondary Chemistry Form 3, Pages 141-144
KLB Secondary Chemistry Form 3, Pages 144-145

NITROGEN AND ITS COMPOUNDS

Reactions of Dilute Nitric(V) Acid with Metals
Reactions of Dilute Nitric(V) Acid with Carbonates and Hydroxides

By the end of the lesson, the learner should be able to:
Test reactions with various metals
Explain absence of hydrogen gas production
Observe formation of nitrogen oxides
Write equations for metal-acid reactions

In groups, learners are guided to:
Experiment: Add dilute HNO₃ to Mg, Zn, Cu. Test gases produced with burning splint. Observe that no H₂ is produced (except with Mg in very dilute acid). Explain oxidation of any H₂ formed to water. Record observations and write equations.

Various metals (Mg, Zn, Cu), Dilute nitric acid, Test tubes, Gas testing apparatus, Burning splints
Various carbonates and hydroxides, Dilute nitric acid, Lime water, Universal indicator, Test tubes

KLB Secondary Chemistry Form 3, Pages 147-150

NITROGEN AND ITS COMPOUNDS

Reactions of Concentrated Nitric(V) Acid - Oxidizing Properties

By the end of the lesson, the learner should be able to:
Demonstrate strong oxidizing properties
Test reactions with FeSO₄, sulfur, and copper
Observe formation of nitrogen dioxide
Explain electron transfer in oxidation

In groups, learners are guided to:
Experiments: (a) Add concentrated HNO₃ to acidified FeSO₄ - observe color change. (b) Add to sulfur - observe reaction. (c) Add to copper turnings - observe vigorous reaction and brown fumes. Explain oxidizing power and reduction to NO₂.

Concentrated nitric acid, Iron(II) sulfate, Sulfur powder, Copper turnings, Test tubes, Fume cupboard access

KLB Secondary Chemistry Form 3, Pages 150-151